Upgrade your oven with this top - notch aftermarket fan - forced oven element. Compatible with Westinghouse, Simpson, Chef, and Electrolux ovens, it's a reliable replacement part. This 2200 - watt, 240 - volt element comes with a normal mounting bracket. The element has a 20.5 - cm diameter and an overall depth of 30 mm from the top to the bracket. The element ends are 25 mm apart, and the mounting holes on the fixed bracket are 55 mm apart. It fits a wide range of oven models, including EOC624S*49, POP663S*02, PDP794W, and many more. If you're not sure if this element is suitable for your oven, contact us with your full model number before purchasing. With over 25 years of experience in supplying appliance parts to both trade and retail, you can buy with confidence.
Using this oven element is straightforward. First, make sure your oven is unplugged or the power is turned off. Remove the old element carefully by detaching it from the mounting bracket. Then, attach the new element to the bracket using the mounting holes. Plug in your oven or turn on the power. When using the oven, you'll notice the even heat distribution provided by the fan - forced design. For maintenance, keep the element clean by wiping it gently with a damp cloth when it's cool. Avoid using abrasive cleaners as they can damage the element. If you have any problems with the element, don't hesitate to contact us. And always double - check the model compatibility before installation to ensure a proper fit.
