This 2100 - watt, 230 - volt fan - forced oven element (Part No. HM14100, equivalent to Part No. 77X6400) is a great fit for various oven brands. It has a 19.5 - cm diameter and an overall depth of 30 mm from the front to the bracket. The bracket hole centres are 45 mm from the edge of the element loops. Each end of the element features single 6.4 - mm spade terminals that point straight back, and the element ends extend 46 mm behind the bracket including the spade terminals. The threaded holes in the mounting plate are 55 mm apart. It suits some Brandt, Carrera, Cuisina, Homark, Hygena, Kleenmaid, and Proline ovens. If you're not sure if this part is right for your oven, contact us with your brand and model number before buying. With over 25 years of supplying appliance parts to trade and retail, you can buy with confidence.
Using this oven element is easy. First, make sure your oven is turned off and unplugged for safety. Carefully remove the old element by detaching the spade terminals and unscrewing the mounting plate. Then, install the new element in the same way. Make sure it's firmly in place. When using the oven, don't overheat it as it can damage the element. Keep an eye on your oven's performance. For maintenance, clean the element regularly. Use a soft cloth to wipe off any debris. If you notice any signs of wear or damage, like cracks or breaks, stop using the oven and replace the element. If you're ever unsure about anything, feel free to contact us.
