Upgrade your imported Ardo, Merloni, Electra, and Servis front - loading washing machines with these top - notch motor carbon brushes. This pair of brushes, marked with 46 05 L94MF7, is a common type used in many European machines made by Ardo Merloni. They're specifically designed to fit machines using an IDE motor. The mounting holes are 22mm apart and 26mm back from the front edge of the brass brushholder, and the locating pins are 15mm apart and 19mm back from the front of the brushholder. It comes with a 6.4mm spade terminal. These brushes are a perfect fit for a wide range of models, including ELECTRA AWM1150A ECO and many SERVIS models. If you're unsure if it's suitable for your machine, just contact us with your model number before buying. When these brushes are worn out, you'll notice erratic spinning or no spin at all. They're super easy to install and come with a full guarantee. With over 25 years of experience supplying appliance parts to both the trade and retail, you can buy with confidence.
Using these carbon motor brushes is a breeze. First, make sure your washing machine is unplugged for safety. Locate the old brushes and carefully remove them. Then, place the new brushes in the same position as the old ones, making sure the mounting holes and locating pins fit correctly. Connect the 6.4mm spade terminal. Before using the washing machine again, double - check that everything is installed properly. As for maintenance, keep an eye on the spinning performance of your washing machine. If you notice any erratic spinning or no spin at all, it might be time to check the brushes. Also, if you're not sure which model of washing machine these brushes fit, always contact us with your model number before purchasing. With proper use and a bit of attention, these brushes will serve you well for a long time.
