Motor carbon brushes, a pair suitable for Ariston, Indesit, Whirlpool, and Philips washing machines. Part number is BT405A, equivalent to 19996, 12IN01, UNI6877, SV1202, 105214, CAR52, 481931088529. Similar to CAR69 but with longer carbons. These brushes fit a wide range of washing machines like Indesit, Ariston, Bosch, Siemens, etc., that use a square C.E.SET motor. The mounting holes are 25mm apart and 16mm from the front edge of the brass brushholder. The locating pins are also 25mm apart and 26mm from the front. New carbons protrude 35mm from the brass holder and come with 4.8mm spade terminals. A common brush type for European machines. Signs of wear include erratic or no spin. Suitable for many Whirlpool AWM, AWG, AWO models, as well as Maytag and Indesit models. Easy to install and fully guaranteed. If unsure, contact us with your brand and model number before buying. With over 25 years of supplying appliance parts, buy with confidence.
Using these carbon motor brushes is quite straightforward. First, make sure your washing machine is turned off and unplugged. Then, carefully remove the old brushes and replace them with these new ones. Remember to align the mounting holes and locating pins correctly. If you're not sure how to do it, you can always watch some online tutorials or contact us for help. When it comes to maintenance, there's not much to do. Just keep an eye on the spinning performance of your washing machine. If you notice erratic spinning or no spin at all, it might be a sign that the brushes are worn out and need to be replaced. Before purchasing, always double - check if the brushes are suitable for your washing machine model by providing us with your brand and model number. This will save you time and ensure a perfect fit.
