These Hoover Hero vacuum cleaner bags, part number T156, come in a pack of 10. The cardboard dimensions are 130mm wide and 94mm high, with a total height of 114mm including the tab. The tab can be folded 14mm from the top. The hole has a diameter of 40mm and its centre is 59mm from the top of the tab. They're similar to Menalux T35B, Anlin AF469, Stokes V7233, Qualtex SDB064, and Hoover H45. These bags fit a wide range of vacuum cleaners, such as Hoover Hero 150, 1500, 1600, Vacstream 1400, 1500, Goblin 4711, 4751, and many more. With 25+ years of experience supplying appliance parts, you can buy with confidence.
Using these Hoover Hero vacuum cleaner bags is easy. First, make sure your vacuum cleaner is turned off and unplugged. Open the bag compartment of your vacuum cleaner. Take a bag from the pack and carefully insert it into the compartment, aligning the hole on the bag with the intake on the vacuum cleaner. Fold the tab as needed to secure the bag in place. Then close the compartment. When the bag is full, turn off and unplug the vacuum again. Open the compartment, remove the full bag, and dispose of it properly. Seal the new bag before putting it in to keep dust from spreading. As for maintenance, regularly check the bag for signs of wear or damage. Replace the bag when it's about three - quarters full to keep your vacuum cleaner working efficiently. Also, clean the area around the bag compartment to prevent dust buildup. And remember, these bags are disposable, so don't try to reuse them.
