Fisher & Paykel 55degreeC Normally Open Campini Fan Thermostat - Part # FP574339

Fisher & Paykel Campini presents a top - notch 55°C normally open thermal cutout. Part numbers are FP574339 and 574339. This thermal cutout serves as a cooling fan control thermostat in numerous Fisher & Paykel built - in ovens. It has a ceramic body with a diameter of 14.2mm and a height of 12.4mm. Two 6.4mm spade terminals are attached. With maximum ratings of 16 Ampere at 250VAC, it cuts out at 55 degrees Celsius. At room temperature, it's normally open and closes when it hits the rated temperature. We've been in the appliance parts supply business for over 25 years, so you can buy with confidence.

Using this Fisher & Paykel Campini thermal cutout is easy. First, make sure your oven is turned off. Locate the area where the old thermostat was installed in your Fisher & Paykel built - in oven. Then, carefully connect the two 6.4mm spade terminals to the appropriate spots. When the oven starts to heat up, the cutout will stay open at room temperature. Once it reaches 55 degrees Celsius, it will close as expected. As for maintenance, check the terminals regularly for any signs of corrosion. If you notice any issues with the cutout not working as it should, or if there's visible damage to the ceramic body, it's a good idea to replace it. Also, always ensure that the oven is disconnected from the power source before performing any checks or maintenance.