Introducing the HERBIE CLIP™ Nylon Hose Clamps, sold in packs of 10. Part number is HC1361-10. These clamps measure 13mm x 6mm. The minimum diameter (A) is 12mm, the maximum diameter (B) is 13.8mm, the band width (C) is 6.1mm, the band thickness (D) is 1.7mm, the head height (E) is 12.9mm, and the maximum head width (F) is 28.9mm. These nylon hose clamps are a top - notch alternative to metal clamps. They feature a patented double - jaw design that can withstand up to 200psi. The material is heat and UV stabilized and resistant to contaminants. They are quicker and easier to install or adjust compared to metal clips. With no sharp edges, they enhance safety for the operator. They form a near - perfect circle when clamped, minimizing leak paths. There are fitting and removal tools available for production use. Made from a carbon - based polymer, they will never rust or corrode. Being non - conductive, they are great for cable fixing and cause no electrolytic reactions with other metals. They have over 20 years of field - tested use in various applications. They are simple in design and cost - effective. We've been supplying appliance parts to both the trade and retail sectors for over 25 years, so you can buy with confidence.
Using these Herbie Clip nylon hose clamps is a breeze. First, make sure the hose and the fitting are clean. Then, place the clamp around the hose where you want it to be secured. Use the fitting tool if you have one for a quicker and more precise installation. If you need to adjust the clamp later, it's easy to do without much hassle. When it comes to maintenance, these clamps don't need much. Since they're heat and UV stabilized and resistant to contaminants, they'll last a long time. Just keep an eye out for any signs of excessive wear, but that's rare due to their high - quality construction. And remember, they're safe to use as there are no sharp edges, so you don't have to worry about cutting yourself during installation or removal.
