The Fisher & Paykel 322Watt defrost element is a great fit for the fridge/freezer of the 680 series. Part numbers include FR-06V2 and FR-06. It's similar to genuine part numbers like FP821730P and Qualtex part numbers such as RFP014. This U-shaped defrost heating element is designed for the freezer compartment of some early 680 series Fisher & Paykel frost-free fridges and freezers using R134a gas, but not for models with R600a gas. It operates at 320 Watts, 240 Volt AC, with 180 ohms resistance. Measuring 460mm wide, it has 135mm and 175mm bent-up ends and bare end flyleads with inline fuses. The package includes mounting hardware and a 2-pin plug with molex pins. It fits early 680 series no-frost models like E361T, E406B, etc. You'll need to splice the original plug, wires, and overtemp fuses onto the element wires. We've been supplying appliance parts for over 25 years, so you can buy with confidence.
Using this Fisher & Paykel defrost element is straightforward. First, make sure your fridge or freezer is of the early 680 series and uses R134a gas. Then, carefully splice the original plug, wires, and overtemp fuses onto the element wires as instructed. The mounting hardware and 2-pin plug with molex pins are included to help you install it easily. As for maintenance, keep an eye on the inline fuses. If they blow, replace them promptly. Also, ensure the element is clean and free from any debris. Remember, this element is not suitable for models using R600a gas, so always double - check your appliance's specifications before installation.
