This is a high - quality Hewlett Packard Deskjet 340 Series AC/DC adaptor. It has a part number of 0950 - 2435 or 91 - 53208. The adaptor offers a regulated DC output of 10.6 volts and 1320 mA. It's a switch - mode regulated type, capable of handling an AC input from 100 to 240 volts. Fitted with a standard round 2.1mm DC plug with a negative centre, and the plug can be removed to fit other equipment. It's suitable for the Hewlett Packard DeskJet 340 portable printer and may also work with other devices that require a similar voltage and up to 1.32A current. Comes with a figure - 8 mains power lead. By using this adaptor, you can save both time and money as you won't need to use batteries anymore. With over 25 years of experience in supplying appliance parts to both trade and retail, you can buy with confidence.
Using this Hewlett Packard adaptor is easy. First, make sure your device is turned off. Plug the figure - 8 power lead into a power outlet and connect the other end to the adaptor. Then, connect the adaptor to your device using the 2.1mm DC plug. Remember, the plug has a negative centre, so insert it correctly. When using, ensure the voltage requirements of your device match the 10.6 volts and 1.32A output of this adaptor. Don't use it with devices that require a different voltage or higher current. For maintenance, keep the adaptor in a dry and cool place. Avoid exposing it to water or extreme temperatures. If you need to change the plug, do it carefully to prevent any damage. This adaptor has been designed to last, so follow these simple steps and it will serve you well.
